Quick Facts:
Steynbath Crossing
Removed
Removed in Version 1.0.
Steynbath Crossing
Crossing
Signal Box
Satus Signal Box/Steynbath Crossing Hut
Tracks
1
Road Lanes
1
Gate Operation
Manual
Type
Manually controlled gate
Crossing Code
SC
Closest Station
XP Requirement
100 XP16.667 min <br />0.278 h <br />
Steynbath Crossing was a small crossing located just after Satus Services, and situated near Steynbath Halt.
It's cabin had the lowest XP entry requirement in the game, at 100XP, hence it was it a great starting point for many novice players. The responsibility of the operator was to communicate to Dovedale East and Satus Services, along with the operation of the manual level crossing. The crossing, along with the cabin, was removed in Version 1.0 and replaced with the Satus Level Crossing, however the station remained.
Operations
How to Operate
Below is a guide on how to operate the crossing. Ensure to turn on automatic operations when leaving the box and nobody is available to take it over.
Sequence
The operations sequence is as follows:
- Receive a bell from Dovedale East Signalling Centre or Satus Signal Box about an incoming train.
- Set Signals 1&2 accordingly.
- Close the gates to allow trains to pass.
- Ring the warning bell.
- Once trains have passed, bell the appropriate box or centre.
- Open the gates to traffic and turn off the warning bell.
Bell Codes
See more at Bell Codes
Beat | Meaning |
---|---|
1 | Call Attention |
1-2 | Freight Train Inbound |
1-3 | Passenger Train Inbound |
1-4 | Other train type inbound |
2-1-3 | Train Arrived |
2-2 | Acknowledge Train |
5-2 | Signal Defective |
5-5-5 | Opening of crossing box |
6 | Obstruction danger |
9 | Train passed without tail lamp |
(Call)-Pause-2 | Fast |
Rapid Beats in Succession | Emergency |
Trivia
- This crossing box was often not staffed, and left on automatic mode.
- Traffic gates did not have collisions.